-
---@basement:~$ cd gasket-driver/
---@basement:~/gasket-driver$ cd src/
---@basement:~/gasket-driver/src$ nano gasket_interrupt.c
---@basement:~/gasket-driver/src$ cd ..
---@basement:~/gasket-driv…
-
```bash
sudo ./dkms-install.sh
sudo: /etc/sudoers.d is owned by uid 1023, should be 0
About to run dkms install steps...
Creating symlink /var/lib/dkms/rtl8821CU/5.4.1/source -> /usr/src/rtl8821C…
-
```
$ uname -a
Linux work 6.8.0-45-generic #45~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Wed Sep 11 15:25:05 UTC 2 x86_64 x86_64 x86_64 GNU/Linux
$ sudo lsusb
Bus 002 Device 001: ID 1d6b:0003 Li…
-
Hello @ikwzm,
I have been following your instructions for installing XRT on Debian 10 (ARM64) as described in the repository. Previously, I posted an issue, and thanks to the feedback, I now have a…
-
Does anyone know how to teach the dkms autoinstaller the --force flag?
After a proxmox kernel upgrade the i915 module is built correctly but not installed.
A "dkms status" then shows the message for…
-
I get the following error while attepting to install ice-zc-dkms
```
Setting up ice-zc-dkms (1.12.7.8945) ...
Loading new ice-zc-1.12.7.8945 DKMS files...
Building for 5.15.0-97-generic
Buildin…
-
From #6 , there's a bunch of instructions that requires tinkering to kernels.
However, I actually found that for my Jetson Nano Orin, the F710 Logitech controller is listed as `dev/input/event1` an…
-
Can we make this work with DKMS? I believe all you need is to add another path target for:
```
usr/src/*/dkms.conf
```
Doing this will allow your script to save kernel modules that will be rem…
-
I tested
```
# cat /etc/*release
DISTRIB_ID=LinuxMint
DISTRIB_RELEASE=20.1
DISTRIB_CODENAME=ulyssa
DISTRIB_DESCRIPTION="Linux Mint 20.1 Ulyssa"
NAME="Linux Mint"
VERSION="20.1 (Ulyssa)"
ID=l…
tele1 updated
2 years ago
-
### Task description
## The current status
Currently, 3rd-party wifi drivers cannot be installed on a per-board basis. Although some drivers are restricted to a specific LINUXFAMILY, many drivers ar…