-
Please add [Blynk_Async_GSM_Manager library](https://github.com/khoih-prog/Blynk_Async_GSM_Manager) to Library Manager.
Thanks and Regards.
---
By design, Blynk user can run ESP32/ESP8266 board…
-
https://github.com/khoih-prog/DoubleResetDetector_Generic
DoubleResetDetector_Generic is a library for the **Arduino AVR, Teensy, SAM-DUE, SAMD, STM32.** etc. boards to enable trigger configure mod…
-
In my application, there is a process indicated on the LCD.
I want to allow something along the lines of "You can press reset twice, while the logo is on screen, to enter the ... mode"
That logo…
-
Hi
I get this "error" when compiling with platformio.
Is there a way to fix this?
``.pio/libdeps/d1_mini/DoubleResetDetector_ID1679/src/DoubleResetDetector.cpp: In member function 'void Doubl…
-
It may be worth noting in the Readme that the first 127 bytes (32 blocks) of RTC memory on the ESP8266 are overwritten by OTA.
[https://arduino-esp8266.readthedocs.io/en/latest/libraries.html?highlig…
W4KRL updated
4 years ago
-
https://github.com/khoih-prog/ESP_DoubleResetDetector
Using this library to detect a double reset, using RTC Memory for ESP8266 and EEPROM for ESP32.
Initial Release v1.0.0 to add support for ESP3…
-
I would like to retain the original WiFi.hostname("MyHost") functionality of the original WiFi library.
In this library it seems not supported. The hostname is also showing up on my router as ESPbl…
-
### Basic Infos
ESP-01 ( 8266 ) Module still create AP after setup and successful log in as client. I think that should not be happening. It connects as client ok, gets IP where can I access the valu…
-
Since DoubleResetDetector isn't practical, add a button to pull a GPIO low and force a boot into hotspot mode.
-