-
I finished building my Turing Machine, and it mostly works, but now I've been troubleshooting some odd behaviour. Here's a weird one for you guys:
# Issue
The Turing Machine introduces and drops…
-
I've managed to get most of the way through the build but it stops at the end saying
c:\esp\esp-idf\esp32\build/../main/grbl/grbllib.c:220: undefined reference to `corexy_init'
I've got no idea h…
-
enviro grow with v 0.0.9 runs for a while then hangs. I turned off uploading to Adafruit which seemed to make it last longer between hangs but it still just stops. soft reboot and sometimes a poke…
-
Hello all,
I am trying to document a H topology cable:
![kép](https://user-images.githubusercontent.com/1609182/190420632-b4a90e2d-d6dd-4a9c-977e-8fe89dc76c76.png)
From the following source:
h…
-
The ESP32 SD/MMC Host Controller Driver (drivers/sdhc/sdhc_esp32.c) supports 1-bit to 4-bit SDIO, but currently only supports the ESP32. Is it possible easily extend this for the ESP32-S3 or is SD/MM…
-
When trying to use the WonderTANG on a Philips VG8235 two problems have been observed:
- problem 1 is that on every power on (not reboot) the caps led turns on briefly and the cassette relay clicks b…
-
Hi
I was tried several ports and combinations which took about 3 hours but the relay doesn't work with m81 command, can somebody share their skr 1.3 used pins and firmware changes for this relay?
…
-
The default homing sequence, homes X, then Y and then finally Z.
This is not very safe as it risks dragging the tool across obstacles on the bed, the correct sequence is to home Z first so it is l…
-
mPCIe extension cards often require correct kernel modules/drivers and/or firmware blobs. If the card is not detected, be sure to check whether all needed modules and drivers are present on the system…
-
Hi - I was excited to see this driver, so I dusted off my old 0404 and tried the install on Catalina on a Macbook Pro "late 2013".
Followed directions, except I could not see how to do the step whi…