-
### PROBLEM DESCRIPTION
Sonoff devices after upgrade to Tasmota 12.0.2 reboot every ~20 minutes with StatusSTK":{"Exception":29,"Reason":"Exception","EPC":["40252ca8",...
### REQUESTED INFOR…
-
### The problem
I'm currently following this [guide](https://albert.nz/esp32-led-strip/)
Unfortunately the code fails to compile, with the following error;
INFO Generating C++ source...
INFO…
-
Hi im having a matrix displaying image with a blan link in the middle because of hub75 E-Line.
Im curious why since i tried all options with the active adapter that this repository suggest @hzeller…
-
There seems to be a problem with the firmware after an error on the CAN Bus occured:
```
(2020-08-26 10:16:07.727451) can0 RX - - 0030A301 [0] ''
(2020-08-26 10:16…
GBert updated
2 years ago
-
So I"m trying to connect a 32x32 HUB75B (don't know what the B indicates) to an electrodragon bonnet. This bonnet already came with the fixed version, as there was a problem with it in February.
Th…
-
Hi,
I am controlling my Chinese P5 outdoor module 192x64 (32x32, 6 cols, 2 rows) LED chain for months using RPI3 B+. I was using plain lite distribution of Raspbian Stretch mainly with Chinese HUB7…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
PID and shutter setup Pidauto 0 command wont stop control and pidmanualpower value wont be output.
### RE…
-
hi!
I'm using RepRap Smart Controller for my printer and my motherboard Ramps 1.3.
[http://www.electrodragon.com/product/ramps-2004-lcd-smart-controller-reprap/](http://www.electrodragon.com/product…
-
Thanks for this unique library. I have the following setup:
- P2.5 128x64 1/32 panel with E line. This module seems to be new and it is not the typical combination of two 64x64 modules as it has a s…
-
Hi,
I purchased some 128x64 panels from led-card.com (https://www.led-card.com/p2-fullcolor-led-indoor-module.html), the panels are P2 and from what I can see they using the following chip ICN2038…