-
### Board
ESP32-C6-WROOM-1-N8
### Device Description
| SD CARD PIN | ESP32-C6 PIN |
| MISO | 20 |
| MOSI | GPIO19 |
| CS | GPIO18 |
| SCK | GPIO21 |
| VCC | 3.3V |
| GND | GND |
##…
-
**Describe the question/query that you have**
I have the ESP zigbee gateway dev kit (ESP32-S3 + ESP32-H2).
Is it possible to use the same kit as a controller + bridge at the same time?
**Additi…
-
### Question
I have gotten the sleepy end device code to work on my ESP32H2 - however, I cannot use a led driver (connected via i2c) after the board wakes from sleep. Is there a lock that I need to …
-
I've recently purchased come ESP8684 WROOM-01C-H2 [1] and tested its compatibility with AY-WiFi.
While it's pin-compatible with ESP12E, it requires rebuilding esp-at firmware to use UART with TX on…
-
### Is your feature request related to a problem?
_No response_
### Describe the solution you'd like.
```c
int bldc_pid_operation(bldc_pid_t* pid, int currentVale)
{
_iq16 q16Up, q16Ui…
-
I have added Change to the ISR ability and corrected what others have already suggested .
It is frustrating to purchase RobotDyn products only to have the firmware not function .
Here is the fix…
-
### Answers checklist.
- [X] I have read the documentation [ESP Zigbee SDK Programming Guide](https://docs.espressif.com/projects/esp-zigbee-sdk) and tried the [debugging tips](https://docs.espressif…
-
The ESP32 Core for Arduino 2.x is the most recent major version currently recommended for use with PlatformIO. The decision to discontinue support was made by the Espressif company, as indicated in th…
-
### Related area
OpenThread
### Hardware specification
ESP32-C6, ESP32-H2
### Is your feature request related to a problem?
Hello,
I'm using this example: [RouterNode.ino](https://github.com/e…
-
Bonjour,
comme je n'arrive pas à me connecter a ZHA avec la version smoke_detector, j'ai essayé la démo mais sa ne compile pas : le build ne va pas jusqu'à la fin :
```
FAILED: esp-idf/main/CM…