-
@Dilbert66 Wonder if you could help with this issue, only doing this after an update of ESPHome was released recently.
Alarm still works fine, but i cant update the ESP32 device.
INFO ESPHome 2…
-
### The problem
Hi all,
I try to set up an Esp32cam but always run in the error above. The module I am using is this one (although from another vendor but the pin outs are the same): https://micr…
-
There is an enormous delay of up to several minutes when operating the light functions (on/off, dimming) in Home Assistant.
What can be done to make this happen much faster?
Here is my yaml file…
-
using the web interface i uploaded the bluetooth-proxy to my device and it goes into a boot/abort loop. I've used this device and cable before for this project, i was going to update it to the curren…
izenn updated
3 months ago
-
I work on an esp32 based device where we rely heavily on MicroPython for our development workflow and device code. We started using MicroPython around 2 years ago, and during that time we have develop…
-
**Describe the problem you have/What new integration you would like**
I would wish for a ESPHome OTA retry-function. A counter could be used, which I would set e.g. to “50”, which automatically click…
-
Im using esp32-4848S040CIY3, whilst performing an update the screen is flickering. Im using LVGL and calling a function to do OTA. I also get a slight flicker when connecting to wifi, or it seems s…
-
I was recently interested to build static and shared library versions of the `micropython/examples/embedding` case using cmake and I managed to get it roughly done ( see this [public repo](https://git…
-
### The problem
Compiling a config that uses the Ethernet Component with an ESP32-S2 board gives "error: 'esp_eth_mac_new_esp32' was not declared in this scope"
Looks like a missing library element?…
-
Hi, thanks for your library!
I'm trying to send OTA firmware updates to ESP32. I'm following this [example ](https://github.com/ClaesClaes/Arduino-ESP32-NimBLE-OTA-iOS-SwiftUI) to test proof of con…