-
I am trying to use the ESP32-S3 implementation that was released with the version 9.0.0
I have the following questions:
1. Is there a updated documentation for the bootstrapping pins values?
2…
-
Getting compile error in platformio with SensESP v3 in file **_analog_reader.h_** when using ESP32-S2 and S3 variants:
**_pio/libdeps/adafruit_qtpy_esp32s3_n4r2/SensESP/src/sensesp/sensors/analog_r…
-
I try flashing the Freenove_ESP32_S3_WROOM_Board using Arduino IDE 2.3.3 . The Board Manager seems the current version (https://github.com/espressif/arduino-esp32, https://dl.espressif.com/dl/package_…
-
### Operating System
Linux
### Arduino IDE version
Arduino IDE 2.3.2
### Board
ESP32S3 Dev Module
### ArduinoCore version
2.0.13
### TinyUSB Library version
Latest 3.1.4
### Sketch as ATTACH…
jhsa updated
2 months ago
-
为什么没有esp32s3做sdio从机这种组合方式？同样的2.4g wifi4，sdio，我认为s3会比c6快吧？毕竟主频高，双核。
-
Hi,
I am currently connecting a SIM800L to an ESP32 s3 using pins rx: 18, tx: 17
and running this code:
from machine import UART
id = 1
gsm = UART(id, 115200)
Result:
Guru Meditation Erro…
-
Side note: Your `README` is out of date - I had to go into the source to find the updated lambda to fix the float conversion issue.
The current project throws a build error on ESPHome 2024.7.4:
…
qJake updated
3 months ago
-
Hello developer, I use esp32s3 n16r8 development board flash size 16M after brushing into the firmware or can not identify the wireless route, the source code needs to modify where to adapt?
-
Currently it is not possible to use the ESP32S3 variants with 8MB PSRAM. See issue #64510.
For me it breaks the use of PSRAM on the XIAO ESP32S3 boards I want to use.
The solution would be to be a…
-
### Board
ESP32-S3-DevKitC-1-N-32R8V
### Device Description
ESP32-S3-DevKitC with only USB serial cable attached.
### Hardware Configuration
n/a other than onboard RGB used in sketch.
…