-
If I try to load an sbp file off my desktop there is an error in the log that the routes are incorrect. You can get a file to run if it is already pending in the job manager, but this does not seem in…
-
Currently, table limits are saved both in opensbp/FabMo, where they are exposed in the config_manager, as well as in G2 as: _axis_tn: _low-value_ and _axis_tm: _high-value_
It would probable make …
-
/fabmo/package-lock.json was accidentally committed to the origin repo with the foundation 5 revert push. Remove it.
-
Here are three, relatively subtle but at times distracting issues with the manner in which the PAUSE-and-display something is working. All in an sbp file format here. Just un-comment the single commen…
-
In the gcode runtime, if "STOP" in the footer is clicked, then motion stops. Some times (pretty frequently) the resume/quit display disappears and the "STOP" footer returns with no user intervention. …
-
Iimplement all [FP] parameters for file-running; some may be done or stubbed in; such as proportion and 2d or 3d offset;
"the OpenSBP command [VA] sets the current locations (first 6 parameters) a…
-
If the feed hold button is pressed during a timed openSBP pause it completely crashes FabMo. System needs to be rebooted in order to get running again.
-
-
If you run a job that spins the spindle and during motion you create a feedhold, the spindle retracts and powers off. When you hit resumne in FabMo, the spindle spins up during a "dwell" and then plun…
-