-
The Feather M0 LoRa draws about 0.37mA of current in idle. When the PMS is connected and the RESET held high, it runs at 1.7mA. If we could instead disconnect power from the PMS entirely using a MOSFE…
-
Arduino: 1.8.15 (Windows 10), Board: "Loomified Feather M0, Arduino, Off, Wifi, Enabled, Enabled, Disabled, Disabled, On"
WARNING: library RF24Network claims to run on avr, esp8266 architecture(s…
-
Line 88 of `adafruit_feather_m0_lora.h` has dio1 on pin 5. However the common pin used on all examples I've seen uses pin 6.
Additionally, and I'm not sure if it makes a difference, but the example…
-
I am trying to receive an uplink confirmation by setting the confirm flag while running sendUplink. My network server (Chirpstack) acknowledges that it is a confirmed uplink). How do I check in my dev…
-
**Describe your question or issue**
Compared to other end-devices LMIC appears to just increment channels after each uplink, not pseudo random channels selection as shown in LoraWan 1.0.3 line 244
…
-
**Describe the bug**
Including BatchSD in the config file will cause the PublishPlat to display an SSLClient error when publishing to Google Sheets. The Dendrometer removed all BatchSD functions from…
-
README.md states:
> - When using LMIC debugging, output is automatically routed to the correct serial port.
> *No need to set the `LMIC_PRINTF_TO` parameter to `Serial` or `SerialUSB` manually.*
…
-
Please add [**NB_Generic library**](https://github.com/khoih-prog/NB_Generic) to Library Manager.
Thanks and Regards.
---
### Features
This library is based on, modified, bug-fixed and imp…
-
this code supports class c or not?? if support means do i have to do any changes to make class c work what i did i have created a class c application in chripstack and increased the tx interval in thi…
-
Please add [**GSM_Generic library**](https://github.com/khoih-prog/GSM_Generic) to Library Manager.
Thanks and Regards.
---
### Features
This library is based on, modified, bug-fixed and i…