-
```
What change would like to see?
TwoWire.end() function that disables I2C and returns both pins to normal
operation.
Why?
So the pins can be reused
Would this cause any incompatibilities with p…
-
```
What change would like to see?
TwoWire.end() function that disables I2C and returns both pins to normal
operation.
Why?
So the pins can be reused
Would this cause any incompatibilities with p…
-
```
Arduino Service should be made compatible with the Firmata protocol
```
Original issue reported on code.google.com by `supert...@gmail.com` on 20 Oct 2011 at 5:34
-
Moved from https://github.com/jgautier/firmata/issues/104
### My Scenario
Using an Arduino Uno and softwareSerial I'm trying to connect to a device that runs at 115200 baud by default. I know the Uno…
-
For future proofing, we should allow pwm/analog writes of values > 14 bits on pins 0 - 15. Currently higher res writes are only available for pins > 15:
https://github.com/firmata/firmata.js/blob/m…
-
```
What change would like to see?
TwoWire.end() function that disables I2C and returns both pins to normal
operation.
Why?
So the pins can be reused
Would this cause any incompatibilities with p…
-
```
What change would like to see?
TwoWire.end() function that disables I2C and returns both pins to normal
operation.
Why?
So the pins can be reused
Would this cause any incompatibilities with p…
-
```
What change would like to see?
TwoWire.end() function that disables I2C and returns both pins to normal
operation.
Why?
So the pins can be reused
Would this cause any incompatibilities with p…
-
`Firmata.begin` pushes the protocol and firmware version on the Stream regardless of its connected state. With USB powered devices using a serial host link this is no problem because booting Firmata a…
-
It is possible to rename the .INO project file before uploading to an Arduino, so it can be identified.
Here is how:
http://firmata.org/wiki/Protocol#Query_Firmware_Name_and_Version
- How do…