-
Hey,
I just built the code from source and flashed it. Next I got a 16GB and 64GB sdcards, formatted them to FAT32 and added epub files. When I booted the device, I get the constant `Core 1 panic'ed…
-
Can you add or point to an example for:
1. Flash storage (EEPROM, Preferences in .cpp)
2. SD card file reading and writing (SD in the .cpp libraries)?
I have looked at the API's for 'embedded_s…
-
Configured UART functionality in user space as well as on yocto and verified on Raspberry Pi 3B.
DoD: Configured UART successfully on yocto and added the correct enable in the layer.
- Successful ve…
-
According to https://github.com/Anime4000/RTL960x/blob/main/Docs/OMCI_CLI.md , there is interesting information in OMCI MIB:
1) Cardholder. POTS card presence may be configured here
2) Circuit Pack.…
-
When adding a new flash card, the program require the question to be not empty. However, when updating the flash card, the program did not check for it. This is inconsistent and should be rectified.
…
-
While adding a new flash card, the fist letter of question and answer will be automatically capitalized. However, when updating the flash card question, the first letter is not capitalized. It should …
-
When adding a flash card, the answer cannot be blank. (Shown in the upper part of the screenshot)
However, when editing the flash card, the user can set the answer to blank. (Shown in the lower part …
-
As shown in the user guide, the first letter of question and answer will be automatically capitalized. However, while updating the flash card, the program did not do so. Even after updating flash card…
-
**Note from the teaching team:** This bug was reported during the _Part II (Evaluating Documents)_ stage of the PE. **You may reject this bug if it is not related to the quality of documentation.**
Th…
-
### Board
ESP32-D0WD-V3
### Device Description
it is custom design module
### Hardware Configuration
There is external flash memory AT25SF041B-SSHB-B and 1 sd card port is connected using some …