-
理论上是不是 openwrt 支持的我们都支持?
-
官方唯一指定支持的 5G usb 无线网卡
-
Hi,
I am trying to use the NanoHatOLED on Armbian. I install it as described but it does not seem to work since I cannot see anything on the display.
Can someone give me some information about it…
-
http://pastebin.com/5mwuw9mR
Im trying to compile this on my NanoPi 2 Fire with a S5P4418 SoC arm-v7-a Cortex-A9 chip.
Atm i have defined CONFIG_PLATFORM_ARM_RPI = y
and also commented out EXTR…
-
Board: Nanopc T4
Kernel:Linux kernel 5.10.76
LibreELEC version: LibreELEC 10.0.2
When I try to add Any of these kernel config , The wifi dongle will stop working
![image](https://user-images…
-
where is pl2303 prolific driver?
-
从这个版本开始[FriendlyWrt-2024-03-29](https://github.com/friendlyarm/Actions-FriendlyWrt/releases/tag/FriendlyWrt-2024-03-29),rtl8812au的USB dongle在R2S上,开始工作不正常。其它设备上的情况未知。
内核日志如下:
[r2s.rtl8812au not wor…
-
I tested today prebuilt from the snapshots.
```
echo /etc/sysupgrade.conf >> /etc/sysupgrade.conf
touch /root/save-me
sysupgrade -c -o https://downloads.openwrt.org/snapshots/targets/mediatek/fi…
-
# Issue template (remove lines from top till here)
Maintainer: @neheb
Environment: aarch64 generic 2b01007dd47b438222332bd64b75304ea5ed5ff6
Description:
Enabling LTO for `git` will cause bui…
-
I created an SD card with a fresh copy of "nanopi-neo2_friendlycore-xenial_4.14.52_20180628.img"
logged on as root via ssh
after the first boot I disabled UART2 with npi-config
then I install…
R4C3R updated
6 years ago