-
As we know, dpdk can run in the vm, can dpvs run in the vm based on kvm ?
>Other environment should also OK if DPDK works, pls check dpdk.org for more info.
Pls check this link for NICs supported …
-
Here is my network topology in NAT-mode
```
Client --- Router --- (dpdk0: 192.168.1.2/30) DPVS (dpdk1: 10.10.127.66/26) --- RS (10.10.127.67/26)
```
Keepalived.conf
```
static_routes {
…
-
Im using default dpvs.conf.single-nic.sample, with a director and fnat to a real server
Im facing about 2Mpps spoofing address syn flood, and I got a lot of message bellow:
> NEIGHBOUR: [neigh_resol…
ba0f3 updated
6 years ago
-
Config two vs group like this:
virtual_server_group 192.168.10.x_http {
192.168.10.4 80
192.168.10.5 80
}
virtual_server_group x_dns {
192.168.10.4 53
192.168.10.5 53
}
an…
-
Thanks Authors, Fullnat works well, Now i want to try snat as a gateway.
I checked the doc, found little doc introducing this mode. could author/someone else give a example how to using it?
thank…
-
./ipvsadm --add-laddr -z 私网IP -t 公网IP:80 -F dpdk0
MSGMGR: [sockopt_msg_send:msg#400] errcode set in sockopt msg reply: failed dpdk api
[sockopt_msg_recv] errcode set in socket msg#400 header: failed…
-
As what this title say, netif_port_start() fail to config tx queue, with rte_eth_tx_queue_setup() in dpdk returns -22. After inspection, i found port id =0, queue id =0, tx descriptor number =1024, so…
-
Can dpvs do supports DR mode? how to configured /etc/keepalived/keepalived.conf ,here interface use dpdk0 or dpd0.kni ? I set as it, but it cannot work ! no keepalived package sendout!
-
我的配置如下
+ ./dpip addr add 10.114.249.201/24 dev dpdk0
+ ./dpip route add default via 10.114.249.254 dev dpdk0
+ ./ipvsadm -A -t 10.114.249.201:80 -s rr
+ ./ipvsadm -a -t 10.114.249.201:80 -r 10.112…
-
lvs fullnat才搭建起来,访问都正常。但一会之后出现日志:
lvs-master kernel: [ 1507.061626] IPVS: bind local address: no port available
访问不到rs了。
这个可能是什么原因呀?