-
Hello
I'm very happy with catsniffer . I succeed with TI RF sniffer with BLE and Zigbee . I did find any explaination of the differents modes in TI sniifer except BLE and zigbee . Can I have the t…
-
The digital.gfsk_mod block has high functionality and code overlap with analog.cpm_mod and digital.gmsk except for a configurable modulation index. Consider replacing the existing implementation with …
-
My exploration into LoRa Radios has gotten me into experimenting with different modules, Now I am trying to see if I can get them to work with each other.
I go two (E19 module) SparkFun SparkX SA…
-
Hi,
I'm trying to recover a UDP signal with satdump **(Branch git master)**
I use the following command :
satdump live noaa_apt $OUT --source net_source --source_id 0 --port $UDP_DUMP_PORT --…
f4tnk updated
3 weeks ago
-
**Description of the issue**
Latest nightly build does not find RTL-SDR or Airspy USB devices.
**Hardware (SDR/PC/OS)**
PC
**Version (Eg, 1.0.0, CI Build 171)**
Nightly Build 1.2.1-b99cd26
**Log…
-
Trying to bind a Esky 150 micro heli v2 ("Airwolf") without success to a Taranis with iRangeX module.
Module is in serial mode (both red and green leds are solid).
Model settings:
External RF: …
-
In the following code you can see I am changing the
```
rfm69.bitrate = 2400
rfm69.preamble_length = 3
rfm69.frequency_deviation = 4800 # 4.8khz
```
This works to match the modem config of t…
-
I would like to write a decoder for [DSC Security Contact Sensor PG 9945,](https://www.dsc.com/manual/24725) it looks like it uses 915Mhz per
[PG9945_PG8945_PG4945_Installation_Guide_29010199R003_EN…
-
Encountered the following CMake Error while attempting to run `fprime-util generate` with fprime v3.4.0
![Screenshot from 2023-12-02 13-16-02](https://github.com/fprime-community/fprime-baremetal-ref…
-
analog.cpm_demod is likely one of the oldest TODO notes in GNU Radio history going on 9+ years. The digital.gfsk_demod and digital.gmsk_demod blocks are identical hierblocks that will work as a generi…