-
I can't get the integration past the wizard loading spinner and keep getting the following error:
`Error Config flow could not be loaded: 500 Internal Server Error Server got itself in trouble`
…
-
Hi
I have been struggling for a week to get the giv_tcp to talk to my newly installed EVC.
It occasionally works (after Givenergy support have done something) but mostly doesn't.
The errors t…
-
**Describe the bug**
Predbat typically comes up with a plan to discharge my batteries down to 2.0kWh (c. 10-11%) immediately before the IO window starts. The plan is always fine during the day.
…
-
**Bug**
I have a notification to update from v8.0.0 to v8.2.3 (this has been happening since v8.0.0)
Press install. The installation appears to proceed but when it finishes it still says v8.0.0…
-
**Describe the bug**
Freeze charge from the plan used to work very well for agile prices that were reasonably cheap but not worth using for charging. My last successful freeze charge was on 21/7/24.
…
-
## Hardware and versions
* Inverter model & generation: AC Coupled
* Inverter firmware version: D0.535-A0.535
* Battery firmware version: 3015
* Home Assistant integration version: 2.0.3
…
-
**Describe the bug**
'load actual' in predbat is much higher than the GivTCP sensor value.
History of predbat.load_energy_h0
![image](https://github.com/springfall2008/batpred/assets/58569471/04643…
-
Doesn't seem like I can get this to work at all. I have a 9.5kwh battery with a separate Gen1 inverter.
Logs as follows
2023-12-18 09:08:38,625 - startup - [CRITICAL] - HA MQTT Service has been…
-
**Describe the bug**
Logger: homeassistant.components.mqtt.number
Source: components/mqtt/number.py:182
integration: MQTT (documentation, issues)
First occurred: 21:35:46 (64 occurrences)
Last …
-
**Describe the bug**
When the charge window schedule changes from what was previously planned, it is not always being updated to reflect the current plan.
**Expected behaviour**
The next schedul…