-
Hi as for title from 3 days my esp stop sending data after 10 minutes from boot, and it became unreachable from wifi, after a manual reset or disconnection it restart correctly but hang again after 10…
-
My (Emat) S0-meters work fine, but once I turn on Opentherm processing, the readings become very noisy (spikes up to 50000 W). I have a Plugwise Anna + Smile thermostat, which is right next to the Hei…
-
HomeAssistant changed the designation of mqtt sensors and switches.
[https://www.home-assistant.io/integrations/switch.mqtt/](url)
[https://www.home-assistant.io/integrations/sensor.mqtt/](url)
…
-
I would like to talk to my Aquarea via Ethernot, not WIFI.
Is there any ready to use solution?
-
Using this project causes so many writes to the heat pump's EEPROM that it should break in no time. Are you aware of that?
https://github.com/Egyras/HeishaMon/issues/225
-
Hi,
Heishamon is a great tool, but I am missing an essential function: To switch on internal heater, e.g. when there is enough solar power.
At the indoor unit I can allow use of internal heater.
…
-
Hi,
I try to use elseif in rules (version 3.2.2) but it's not accepted. e.g. My current WAR function:
```
on Calculate_WAR then
$Ta1 = @Z1_Heat_Curve_Target_Low_Temp;
$Tb1 = @Z1_Heat_Curve_…
-
If more than one topic is changed in Heishamon simultaneously, some are not processed correctly.
I created a button in Loxone to force hot water generation manually, even at night when operation mo…
-
** Versions **
- Home Assistant version (for instance 2023.9): 2024.9
- This integration version (for instance 1.1.0): 1.13.1
**Describe the bug**
Hi,
as of one of the more recent version…
b3nn0 updated
2 months ago
-
Sorry for trying to ask here, I am new at github and did not find discussions in the fork-project https://github.com/eldrik/HeishaMonEth: I would like to skip from Heishamon Wifi to eth and found this…