-
Hi Guys,
my biggest compliment for this amazing plugin. I successfully use it to arm and disarm my security system (through voice scripts triggering Alexa lol). When "on_cmd" is triggered a text fi…
-
There is a problem with the Minimum temperature value. If I try to set it anything above 10 degrees Celsius, I start seeing errror the plaugin is taking too long to load up. If I set the value to 10, …
-
Hi all,
when starting up homebridge, the process initializes the z-way devices but then quits without error message.
Debug Log:
```
root@raspberrypi:/tmp# DEBUG=* homebridge -U ~/.homebridge/
***…
-
Currently setting the Security System (Alarm) state in HomeKit has no effect.
This is simply because I have yet to figure out what (if?) there is a socket command that can be sent to activate it.
-
### Describe Your Problem:
Homebridge posts the following errors, after rebooting upon configuring the Homebridge iRobot plugin:
### Expected behavior:
Homebridge should startup successfully, and n…
-
### Prerequisite
- [X] Yes, I've read the readme completely.
### Cache
- [X] Yes, I've cleaned accessory cache and the issue still exists.
### Version
1.7.0-beta.53
### Device Infoma…
-
Just curious what hardware works best with this, that people have had success with.
-
If You want new functions:
- new types: Blind, Motion, Lock, Garage Door, Contact, Security (4 values switch), Thermostat
- option to set sensor value on startup: on, off, set value (for dimmer or b…
-
Hi e-mcgee,
First of all thank you for your work, it's a very nice thing to adding HomeKit support for this ageing alarm platform!
My issue is similar to others what have already been closed, ho…
iFac3 updated
3 years ago
-
## Alarm system
I set up an `EVO192` panel via `IP150` successfully with home assistant and MQTT, following [this guide in the wiki for installation](https://github.com/ParadoxAlarmInterface/pai/wik…