-
The rocket if the software crashes should resume in the state it was last in, or implement a recovery mode
-
Please fix the following lines of code to have a non-blocking implementation
-
## Issue Summary
via email from @RobTillaart:
Errors in [this](https://github.com/RobTillaart/FRAM_I2C/actions/runs/3794469015/jobs/6452582233#step:4:327) or [that](https://github.com/RobTillaar…
-
用如下命令推流:
ffmpeg -f libk_video -wh 1920x1080 -sensor 3 -i video="test
" -f alsa -ac 2 -ar 32000 -i hw:0 -idr_freq 25 -vcodec libk_h264 -acodec aac
-f rtsp rtsp://10.20.1.55:5544/xxxx/com28
ffmpeg v…
-
Hi @terjeio ,
Just wanted to share my initial impressions after playing some time on webui, ftp and sd.
1. FTP works like a charm
2. Uploading/deleting files from sd via webui and ftp both works perfe…
-
Trying to write a floating point value and reading it back.
But somehow it dosn't work.
this is my code i use .
i'm i doing sothing wrong.
the value i'm writing is 31.12
as you can see t…
-
I am trying to get the 128Kbit fuji fram working with your library but I am on Wire1 bus. In your library.cpp file I have tried to change Wire to Wire1 and WP pin from 13 to 21 but I still get Memory…
-
Hello Terjeio
I bought a TinyBee v1.0 and I test it before mounting in my CNC, Wifi, Webui, SDcard, 5 axis, 3 limits + probes are OK.
Firmware downloaded yersterday, last IoSender
I enabled VF…
-
How can I solve this error or problem.
0x40080400: _init at ??:? //What is the cause of these ??:? in the monitor
idf.py --version
ESP-IDF v4.4.1
uname -a
Linux jan-LubuntuEST32 5.15.0-39…
-
Hello,
I tested my code with an BM280E sensor on I2C2 port the code compiled and worked, now I want to replace the BM280E sensor for an FRAM. I thought this wil be easy one only change adres and na…