-
Now that ESPHome has an official i2s_audio component https://esphome.io/components/i2s_audio.html do you have any plans to update the sound level meter to use that implementation?
-
Hi, does LUCKFOX Pico Pro or Max support I2S protocol. Simply, can I talk to a audio ADC or DAC (like PCM5102) with my Luckfox Max?
Can any of the current GPIO pins be used as I2S pins?
-
Yesterday I updated to the new version of I2S_PDM.H(.C), because of the right channel mono issue. It seems now that this is solved, but the recording seems like a 2x speed. I had one time before, chan…
-
I want to use two i2s port,one as rx and another as tx
But it is found that the two can work normally when they are separated, but the crash occurs when they are put together.
below is code:
…
-
## Environment
- Development Kit: ESP32-Wrover-Kit
- Kit version : v4
- Module or chip used: ESP32-WROOM-32
- IDF version : ESP-IDF v3.3.5
- Build System: Make
- Compiler version…
-
### The problem
Using the official esp32-s3-box-3.yaml, I have added playing a sound (using speaker.play) on trigger on_wake_word_detected and another sound on trigger on_stt_vad_end. The wake work …
-
### Problem Description
I'm using a board with an ES8388. Mostly works well.
Relevant code is below.
Randomly I noticed that some volumes introduced some hiss.
So I experimented and notices init…
-
**Describe the problem you have/What new integration you would like**
ESP32-c6-devkitm-1
ESP32-c6-devkitc-1
both have i2s controller, but editor says c6 is not supported
![image](https…
-
Hey there
Thanks for this project its been very helpful and insightful so far.
I managed to adapt the project to the Arduino's SD library and got the recording workig with the MEM's microphone.. b…
-
### The problem
I am running assist on a RaspiAudio Muse Proto (the config I patched yesterday, with an added switch to debug mute_pinn state, but that is fine now!)
When I use a trigger that ch…