-
Hi, watched the Defcon talk, and it got me really excited, so I decided to try the project for myself. Unfortunately, I'm a complete noob in all of these - pico, soldering, and kernel debugging 😅 So,…
-
hi Tom,
I know your design is just a tester board. But Sparkfun used to sell a clone of the ByteBlasterMV programmer (http://www.sparkfun.com/datasheets/DevTools/FPGA/Altera%20Programmer/Altera_…
-
Hi, When usning SiFiveTools->Flash MCS file to Arty FPGA in Freedom studio,I encounterd error:Unsupported DTM verdion:14.
The detailed log:
2019-07-05 13:48:17.811000: Running Command: C:\Jason\sifi…
-
### Board
ESP32C3 Dev Module
### Device Description
ESP32C3 Dev Module is selected for the board.
The physical board uses Seeed Studio XIAO ESP32C3.
### Hardware Configuration
Built-in USB only.…
-
I am following the 'debugging' sequences.
In normal simulation, "SweRV+FuseSoC rocks" is displayed.
But, in debug mode, there is no response from simulator after "releasing reset" message.
Please c…
-
Do you think there would be enough space on the Uno to add in XSVF programming such that the ATF150x CPLD chips could be programmed via JTAG? They also work with WinCUPL...
I figure since afterburn…
-
It seems that commands 0x80-0x83 not usable
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
root@ubuntu:~/airbreak# head -n 4 tcl/airsense.cfg
source [find interface/raspberrypi2-native.cfg]
transport select swd
set WORKAREASIZE 0x2000
source [find target/stm32f4x.cfg]
root@ubuntu:~…
-
I've tried to upgrade from 2.3 to the latest version (currently 3.0d) and was having issues with programming it with the USB adapter provided on KNJN. I've read about using a JTAG to programming the S…