-
When I run `make`, the error pop up:
```
phoebus@035:~/Documents/github/katapult$ make
Creating symbolic link out/board
Building out/autoconf.h
Compiling out/src/sched.o
make: arm-none-eab…
Z035 updated
9 months ago
-
Issue occured when trying to `make menuconfig`
When running:
```
PS C:\Users\22547\Documents\Github\katapult> make -I menuconfig
```
Occurs the error:
```
There shouldn't be -z。
Makefile:139: …
Z035 updated
10 months ago
-
### Beschreibung
Aktuell ist der ballistische Turm (nur ein Katapult) so implementiert, dass der Turm, sobald ein Gegner in Reichweite ist, die Kraft berechnet die er braucht, um auf den Gegner zu sc…
-
I ran the following but the Katapult Configuration doesn't list the Raspberry Pi RP2040 option, it only lists LPC1786 options.
Am I missing something, like not getting the correct git files?
…
-
Hi there,
First of all thanks for the guide, it's really good.
Let me start by explaining what I've done so far.
1. CAN adapter
1.1 - I flashed the new firmware to the can adapter (U2C).
…
-
## Use-case:
I have several nearly identical printers in a print farm. They all have custom toolheads, with CANBUS toolboards -- but all the toolheads are built identically to serve as warm-swap ass…
-
-
Hi !
Can anyone give me some explanation what "Application start offset" is all about?
I thought that katapult replaces the original bootloader and that´s it.
You have katapult & klipper within…
-
in mainboard flashen update klipper
python3 ~/katapult/scripts/flashtool.py -i can0 -u yourmainboarduuid -r
in toolheadflashing update klipper
python3 ~/katapult/scripts/flashtool.py -i can0 -u b…
-
Klipper reports: ERROR
MCU Protocol error
This is frequently caused by running an older version of the
firmware on the MCU(s). Fix by recompiling and flashing the
firmware.
Your Klipper ver…