-
9d99a308bc59d1efb72c19535eace818cb4e51c9
```
$ linuxcnc -v
/usr/bin/linuxcnc: line 123: /dev/fd/1: Permission denied
/usr/bin/linuxcnc: line 222: /dev/fd/1: Permission denied
/usr/bin/linuxcnc: l…
l29ah updated
7 years ago
-
Hi,
i'm triying to get HAL2Arduino to work and i'm stuck at some point here.
What i have done is download HAL2Arduino-0.5 and change the pinning and stepsPerInchX/Y/Z for my machine (modAccelStepper…
-
Hi!
Form this pullrequest: https://github.com/LinuxCNC/linuxcnc/pull/1172 I understand, that you are using the wj200 module to control your PI500. Could you provide some information on how to set t…
-
Checklist of things to do before more widely publicizing the image this builds:
- [x] Enable SPI overlay
- [x] install ntpd, ensure systemd-timesyncd is turned off
- [x] any non-warranty-voidin…
-
## Here are the steps I follow to reproduce the issue:
My machines, z homes first. Then x any y together. Noticed this issue when my z stepper wire broke.
1. Unplug the stepper wire going to…
-
Hello Boris Skegin,
Sorry to bother, I meet some issue when using this COMP.
I use BBB with machinekit installed, kernel version is 3.8.13-xenomai-r83.
When "loadrt pdoLIBIX2dc" prompt with erro…
-
task_state
(returns integer) - current task state. one of STATE_ESTOP, STATE_ESTOP_RESET, STATE_ON, STATE_OFF.
STATE_OFF is never returned, when you set the state(int) to STATE_OFF STATE_E…
-
https://github.com/Sigma1912/linuxcnc/assets/46067220/6b697e7e-ace3-45d6-b125-af95fb13b218
-
### Is there an existing request for this?
- [X] I have searched the existing requests
### Forums discussion
None
### Subproject(s) affected?
Path
### Idea description
Many CAM applications can…
-
https://odysee.com/@swolebro:4/linuxcnc-software-configuration:4
### old config:
- Drivers
![Screenshot1](https://user-images.githubusercontent.com/12049360/105375254-dbad6600-5c08-11eb-8d4c-ba46…