-
Hello,
i have bought RepRapDiscount Full graphics controller with this display and controller from China. When I run it on Marlin FW 1.1.0 RC3, some problems with contrast appears. It is hard to descr…
-
Is it possible to change the kill button to just as "KILLED" in the lcd display into "kill then reset" or act as a reset switch like the ramps 1.4 reset switch?
-
This is a weird bug, and I have encountered it only twice before.
Marlin RC2
RAMPS
MAX6675 thermocouple
OctoPrint 1.2.7 RPI2
http://pastebin.com/QMRbjHnh
OctoPrint on the RPI2 had been running for …
-
Use FAT32 when using the SD Card. If there are difficulties I can help.
-
Printing by extruding a paste with a stepper motor driven piston does not require temperature control of the extrude head or the bed. It does require control of a fan to dry the paste after extrusion.…
-
I'm having an issue on multiple printers running the latest code where when printing a higher density triangular infill pattern 30% or higher there seems to be an issue with over extrusion where infil…
-
As "clones" of prusas MK42 heated bed become more common (you can oder one on indiegogo right now) it might be worth implemention prusas bedleveling in marlin, as its somewhat difficult for normal us…
-
I noticed a post on Twitter complaining that the latest Marlin wouldn't fit on a 1280 board, but I don't know how accurate that is. So I'd like to be able to find out how much total Flash Memory and w…
-
Not relevant any more ~~I have uplugged extruder cable, which contains the following wiring:~~
- ~~extruder stepper;~~
- ~~extruder heater;~~
- ~~extruder fan;~~
- ~~extruder thermistor;~~
- ~~part fa…
-
I am using a BLTouch probe for bed leveling with RC4. This is treated like a servo for deploying the probing pin. I am having random issues where the pin seems to get pushed back out before the the …