-
Hi,
I am using the homeassistant integration with your dsmr_parser module.
My smartmeter is a version 5 smartmeter with standard settings (115200 8N1).
The readout with the parsed MBusObjec…
-
Have you tested the application for memory leaks? I used the library in my console application and after each reading of data from the mbus device via TCP communication, the memory occupancy increases…
-
https://github.com/ucb-bar/chipyard/blob/255452f20af2eac4bbcf4888d6252b2260888b85/generators/chipyard/src/main/scala/clocking/DividerOnlyClockGenerator.scala#L89
@davidbiancolin, the `${name}` in t…
-
Hello,
In my case: Unipi G100 + M-Bus to RS485 converter + 9 x Qundis heat meters,
libmbus cannot find or read any device. Increasing time from default 300ms to min. 1100ms (baud: 2400) solves this …
-
I've got a Techem Ultra S3 (which is basically a rebranded Sharky 775) heat meter. For some reason the negative values show up prefixed with F. Is this expected?
Here for example we should have a n…
trsqr updated
2 years ago
-
jstorm 在启动时提示内存不足,“There is insufficient memory for the Java Runtime Environment to continue”。我在 storm.yaml 中配置 nimbus.childopts: "-Xmx4g" 后提示 Exception in thread "main" java.lang.ExceptionInInitiali…
-
Good day,
I´m new using libmbus, and I´m experimenting problems to read using secondary addressing. I have one Sontex 531 Mbus slave that when i read using primary adressing works fine.
Mbus-tcp-req…
-
Hi thank you for this great project.
i just want to clarify the hardware part little bit. you mentioned
```
The hardware part is simple esp8266 module with RS232 level converter attached to the…
-
Hallo,
ich möchte aktuell o.g. Stromzähler "SDM 630" auslesen.
Der Mbus Adapter findet die Zähler und erstellte auch Objekte.
Allerdings kann ich nicht alle Werte auslesen.
Bei einigen steht wie f…
-
Erstmal sorry das ich das bei Issues poste aber ich finde keine Community um das Projekt wo ich sowas fragen könnte...
1. Auf der Projektseite steht Kaifa MA309, klappt es auch mit dem Kaifa MA110M…