-
@tensorflow/micro
**System information**
- Host OS Platform and Distribution Ubuntu 20.04:
- TensorFlow installed from source:
- Tensorflow version 2.3:
- Target platform Arduino Nano 33
**D…
-
Is there anyway to access EEPROM ?
-
Hi proto team
i wanted to make a example submit to the apparently growing list
This time it is a MOS Inverter RLC Oscilator
it is actually used on many Microcontroler ICs to run their clocks so i t…
-
Hi,
I am a little confused.
This CRT image runs, but causing picture issues.
[https://www.youtube.com/watch?v=ixoqpP0xUW4](url)
If I run it as a prg, no issue.
cartconv -f Jupiter.crt
…
-
I first want to thank @Koenkk and the rest of the contributors for this great project.
I have a [CC2531 with a big antenna](https://www.aliexpress.com/item/4000439492385.html) which I use as router…
-
Hi,
I get the following when trying to run inspexel:
```
$ inspexel detect --device /dev/ttyACM0 --baudrate 57600 --protocol_version 2 --other_baudrates 57600
# trying protocol version 2
## t…
ubald updated
2 years ago
-
Hi, i used the printer.cfg for Anet A8.
Works fine if display section is commented out.
If i activate this i get this message in terminal:
"Send: status
Recv: // Unknown command: hd44780_send_cm…
-
It would be nice to use additional DIs to load WLED presets.
This feature could enable the Microcontroler for standalone applications without having an additional raspberry pi sending UDP messages or …
-
[klippy.log](https://github.com/KevinOConnor/klipper/files/3541208/klippy.log)
hi
ATM is'nt possible to use open drain mode for gpio, on smoothie board,
i can't use my external driver :( it is p…
Akex2 updated
2 years ago
-
PIO Core Call Error: "Library Storage: /home/gauss/Documents/microcontroler/stc89c52/projects/exam/.pio/libdeps/stc89c52rc\n\n\nError: Traceback (most recent call last):\n File \"/home/gauss/.platfor…