-
**Reported by manuelbi on 2002-06-03 08:46 UTC**
NMS 8280/Sony G900P superimpose emulation via
video-capture-card...
-
Hey, wasn't sure of the best way to reach you, so figured I'd toss this here. I came across your project looking for options to emulate the RP5C01 - they're becoming harder and harder to track down, a…
-
According to [VATT results](https://aoineko.org/msxgl/index.php?title=VRAM_access_timing), with tile-based screen modes (T1, T2, G1, G2, G3 and MC ; aka Screen 0~4) on MSX2, disabling the screen displ…
-
After checking the circuit, here goes some small suggestions for improvement. I hope it helps.
- It's highly recommended to have a good filter for the pin-21 of the VDP. This can improve the imag…
-
While trying to use Nextor's emufile, I discovered that there is a limitation on how it functions. Drives not controlled by the primary Nextor kernel are not allowed/able to be used with it. Using the…
-
Noticed when setting bit 5 of VDP R#0 on real machine freezes (Sony HB-F700), openMSX nothing happens..
Accidentally I coded on openMSX some routines with line interrupts and set both bit 5 and bit 4…
-
Currently, ROMniscience only allows one folder for one handler. This is just because I store my ROMs like that (one system and one folder), and I figure most people do that too. But what if they don't…
-
I use openMSX version 0.13.0 windows vc x64 with a configuration with Panasonic FS-A1GT and Yamaha SFG-05. I boot with a disk A with MSX-DOS2: MSX-DOS kernel version 2.31, MSXDOS.SYS version 2.30 COMM…
-
Hello.
Regardless the country of the rom, all Megadrive games are running on the European ('megadriv' driver) machine which lead to some major problems:
- All games are running at 50Hz instead of 60H…
byblo updated
9 years ago
-
Hello,
OpenMsx 20 on windows 11.
I create a savestate of metal gear game called Metal Gear.0.oms
Then i launch the emulator with the command line:
Openmsx -machine -cart c:\games\msx2\gradius…