-
r2s.img.gz
r2s-slim.img.gz
这2个镜像刷好后默认没有,需要在软件界面安装,安装时就报错,安装好后也无法增加openvpn配置文件
-
# 📖 Abstract:
- ✅ Linksys WiFi6 路由器 `AX5300`, 刷 `OpenWrt`. (路由器翻墙)
# 💯 Related:
- ✅ #86
- ✅ #190
> 树莓派:
- ✅ https://github.com/hhstore/blog/labels/RaspberryPi
- ✅ #165
- ✅ #184
…
-
r2s 固件更新失败
路由器型号和固件版本
设备型号
FriendlyElec NanoPi R2S
固件版本
iStoreOS 22.03.5 2023082509
使用固件更新功能,更新
istoreos-22.03.5-2023092815-r2s-squashfs.img.gz
重启后还是原来的版本
-
### 详细叙述
更新到最新代码,按二次编译操作后无法进行编译
### 重复 issue
- [X] 没有类似的 issue
### 具体型号
RK3328-R2S
### 详细日志
make[3]: Entering directory '/home/tmgg/lede/package/boot/uboot-rockchip'
rm -f /home/tmgg/lede/buil…
tmggg updated
3 months ago
-
实测防火墙的确不蹦了,但被电信踢下线后依旧无法联网。
个人的具体表现为,48小时被电信踢下线后,wan会更新ip,但却无法联网。
防火墙没有崩溃,因此可以通过192.168.2.1进入路由界面。
最后还是需要/etc/init.d/network restart才能重新联网。
具体原因未知
-
### I confirm that:
- [X] I have searched the existing [open AND closed issues](https://github.com/navidrome/navidrome/issues?q=is%3Aissue) to see if an issue already exists for the bug I've encounte…
-
**Hello,**
I have an R2S-Plus and I built an image with Buildroot for this board, following this tutorial: [link](https://wiki.friendlyelec.com/wiki/index.php/Buildroot#Introduction_to_Buildroot).
…
-
**Hello,**
I have an R2S-Plus and I want to build a custom image with Buildroot for it. I followed this tutorial: [link](https://wiki.friendlyelec.com/wiki/index.php/Buildroot#Introduction_to_Build…
-
when i run `gluon-info` on `v2024.3.1-next`(NanoPi R2S) the Public VPN Key does not show and i get this error
`sh: /lib/gluon/mesh-vpn/wireguard_pubkey.sh: Permission denied`
after making `chmod+x w…
-
使用的网卡为RTL8812BU,设备R4S
友善的官方固件可以驱动
系统启动后插入USB网卡,dmesg打印如下
[ 3385.155535] usb 7-1: new high-speed USB device number 2 using xhci-hcd
网络选项中不出现无线网络的配置选项