-
I'm not sure what is going on. I've created a new tagreader.yaml file in /config/esphome/ and I've edited the SSID information for the WIFI, but when I go back to ESPHome in the UI and find the devic…
-
**Describe the bug**
When the temperature sensor is being read, the leds flash random colours.
**To Reproduce**
1. Set to solid color
2. Wait for temperature to be read, default at 20 seconds pa…
-
I have a WS2812 5050 RGB LED Ring with 12 leds. It is connected to pin D4 (GPIO2) on a WEMOS D1 Mini Pro that is configured as bridge. The HUE app on my iPad finds the HUE bridge emulator and reports …
-
If the geiger is deployed outside in its opaque grey plastik casing, there is little use for:
- the small onboard LED (pin 25 on all controllers)
- onboard OLED display
- maybe also the onboard p…
-
**Describe the problem you have/What new integration you would like**
Some ESP boards have a RGB led instead of a "dumb led". Its not possible to use a RGB led as a status led at the moment. It…
-
If I use latest on Arduino IDE it doesn't compile and the error is this
```
In file included from /Users/d/Documents/Arduino/libraries/NeoPixelBus_by_Makuna/src/NeoPixelAnimator.h:30:0,
…
-
**So i do everything correctly, run the visualization code to get everything going, and I get this error in spyder (python).**
 support the wonderful el-cheapo PWM HUB75-controlled LED matrix boards that are used in video walls?
I should think thi…
-
it seems that there has been changes made to the way the LD2410 is being configured in ESP Home and therefor my old config is not valid anymore. I tried changing them by looking at examples here and t…
-
Hello,
I can't get the code to work on an esp32-Wroomer-32. There is no error message when compiling, the transfer also works without problems. However, I always get the following message via the ser…