-
I've observed an issue with the CC1310 while using Contikimac that causes a device to randomly reboot under heavy traffic. The issue only exists when there is more than 1 node on a network and occurr…
-
Curl command in ReadMe no works
Curl -D - -x http://127.0.0.1:8090 -k http://httpbin.org/get
curl: (7) Failed to connect to 127.0.0.1 port 8090 after 2028 ms: Couldn't connect to server
-
The subscriber client script subscribe.py will occasionally reach time out and stop logging data without fatal error. This has been observed to be preceded by the LED on the CC2531 USB dongle going th…
-
On rooted device, Android 8.1
When Firewall is on, every IP in termux and network mapper respond on every port.
When only DNS is active, no pinging can be done.
When RethinkDNS is turned off the pi…
-
As per linux:
```
IP_PKTINFO (since Linux 2.2)
Pass an IP_PKTINFO ancillary message that contains a pktinfo structure that supplies some information about the incoming packet. This only works for d…
-
### What is the issue?
(n.b. I don't fully understand the issue here, but I'm hopeful I've narrowed it down enough to pique someone's interest and see if you can help me sort it out.)
I work in an…
-
### What is the issue?
When advertising a 4via6 route from a MacOS device, clients can't transit to the end target.
pcap on the Mac shows:
```
12 0.456373 fd7a:115c:a1e0:ab12:4843:cd96:6271:a05…
-
Seems like some ipv6/ipv4 backward compatibility problem:
```
$ md5sum ./slrp
d5176f385f243708b347063e46f5c99c ./slrp
$ cat Dockerfile
ARG ALPINE_VERSION=3.18
FROM alpine:${ALPINE_VERSION} …
-
The ESXi TN has 2 vmk:
vmk10 and vmk11 (normally, only vmk10 should be used for VTEP IP Address)
[root@sc2-hs2-b1537:~] esxcfg-vmknic -l
Interface Port Group/DVPort/Opaque Network IP Fa…
-
# Problem description
I am trying to get a network up with csma and link-layer security on the cc1310 and am facing some problems on getting it to work with the rpl border router.
The nodes are …