-
I have flashed esp8266web on nodemcu amica r2 40mhzcflash speed, dio flash mode, 32m flash size, but all I get is a continuos stream of exceptions.
Is this platform supported?
-
Hi Aidan,
What reasons drives you to change from nodemcu to teensy ?
I plan to fork your project to build a YM2612 synth but with an esp32 (the ble capabilities would perhaps be interesting for…
-
# Connecting NodeMCU with Firebase - Shiva Bahadur Basnet
[https://shivabsnt.github.io/iot/Connecting-NodeMCU-with-Firebase/](https://shivabsnt.github.io/iot/Connecting-NodeMCU-with-Firebase/)
-
Dear Colleagues,
I'm facing some issues to get the relay 5v working, i have change from d0 and d1 but it does not work with mine nodemcu v3. Also i change from active low/high and few the same! D1 …
-
Hallo,
das ist mein erstes "Elektronikprojekt" und ich habe von Mikrocontrollern usw. überhaupt keine Ahnung.
Ich habe mir über den Link in [der Einkaufsliste](https://luftdaten.info/feinstaub…
-
### The problem
I'm trying to flash a Wemos 32M flash NodeMCU V3 340G ESP8266. It appears to flash ok, I get the "success" message, however afterwards there is no serial communication, and the devi…
-
Hi Techiesms,
I am creating a Home Automation project with a NodeMCU and a 4 channel relay module.But I am getting some problems with the OTABlynkCredentials program that you have given.
After …
-
Hi all!
I'm trying to use wakaamaNode library (latest version, freshly downloaded) on my NodeMCU board (based on esp8266, https://docs.zerynth.com/latest/official/board.zerynth.nodemcu_esp32/docs/i…
-
Hi friend!
I have a LED Matrix Panel 64x32 Bicolor (1R1G) HUB08; Is it possible to use your sketch on this panel with Arduino Uno or ESP8266 Nodemcu? If yes, how to connect the pins on Nodemcu? Thank…
-
Hello, I've a relay board with 3 pins, VCC, GND and IN. I've connected VCC to 3.3 and GND to GND of MCU. In is connected to a GPIO pin. With pinMode(pin, OUTPUT); and digitalWrite(RELAY1,LOW); and dig…