-
Hello, having eternal issues trying to compile new libmbed.a file
Created a new PC with Ubuntuu linux
Downloaded Arduino IDE 2.0
Install Portenta Board manager
Used the main file below as guid…
-
Hi,
I got my serial to ttl, and was able to flash my ds-d6 through serial. Now I'm trying to add a watchdog, reading all related stuff, not really working. Maybe you can help.
I don't have a deb…
-
Is it possible to use SoftwareSerial?
I have a requirement to communicate with a serial module. While the main/hardware serial is used for debugging, need another serial port to communicate with that…
-
#### Description
Since https://github.com/RIOT-OS/RIOT/pull/17265 usage of `stdio_ethos` will result in a continuously exiting shell and therefore a barrage of prompts with the shell unusable.
T…
-
Hello, probably this is my bad code and already found way to avoid it, but here is something that appears to hang and never end
```
Remote debugging using :3333
0x000240d8 in jshTransmit (data=32 '…
-
This is no longer a blocking issue for us. We have gotten by using our NRF52840-DK backup plan.
I still want to capture it because I'm sure we will meet again.
We were attempting to MSD flash a cu…
0Grit updated
5 years ago
-
**Предварительное описание решения.**
Для примера можно взять:
Low-cost Realtek RTL8761 BT adapter
![image](https://user-images.githubusercontent.com/12629515/219687163-142626c5-a83a-4ace-9d8…
-
Hi boochow, this is great, thank you.
Did you think about going even lower and making it VC4 baremetal instead of ARM baremetal? There is gcc compiler for VC4 VPU and accessing peripherials should…
-
When a pin is switched to OUTPUT the GPIO_PIN_CNF_DRIVE_S0S1 profile is enabled. What is your opinion to implement mode switching via OUTPUT_S0S1, OUTPUT_H0S1, OUTPUT_H0H1, OUTPUT_D0S1.... OUTPUT_H0D1…
-
# Description
This issue is a tracker of the compile time configurations.
After some offline discussions with some RIOT maintainers we came to the conclusion it¡s a good idea to first **identify t…