-
Hi,
I am trying out this simple helloworld code:
https://techtutorialsx.com/2017/12/02/esp32-arduino-interacting-with-a-ssd1306-oled-display/
Would it be possible to add such example to your …
-
#### Type of Raspberry Pi
#### Linux Kernel version
5.4.0-139-generic
kindly suggest a version of luma that can work with linux ubuntu. might be timing or handhake. using oled 128x32
…
-
hello tttapa!
Do you plan to add support for bigger screens?
I am trying to adapt the MCU OLED SSD1306 example to an ILI9341 LCD.
My idea is to display in to display on the top the surround maste…
-
Is it possible to rotate the screen. i.e. have it 180 degrees?
-
Is it possible to display graphics on the display through Adafruit GFX? I have an OLED display SSD1306. The menu is displayed well, but there was a need to show the battery charge in the upper right c…
-
I am using the Espressif ESP32-DevKitC V4 development board with a 2.4-inch OLED display. In my project, I am utilizing the U8g2 library to control the display. However, I have encountered screen corr…
-
Is the SSD1306 OLED (128x64 and 128x32) supporten in espurna?
I'm using a BH1770 and BME280 on a Wemos D1 mini (espurna-core).
I would like to show the sensor values and/or IP/MAC address on the dis…
-
I get garbage OR whatever was there on the last frame displayed on the display, and the code hangs for a long time.
Here is an example of the oled displaying the last frame, while running the demo co…
ric96 updated
2 years ago
-
Hi there,
first: thanks a lot for this great library which saves a lot of space, too.
Using a 128x64 0.96" SSD1306 OLED, I wonder how I could have 3 lines with text as large as possible. If I se…
-
Hi,
I have a little trouble to get the Adafruit Feather M0 working with the OLED Displays. There is no compiling issue it just doesn't show anything (1.19.1). I tried all listed settings of the SSD130…