-
When the system I am listening to gets busy, I end up with a lot of what sounds like duplicate calls in my recordings. What's actually happening though, is when a call ends on the trunked system I'm l…
-
I'm getting a segfault from [trunk-recorder](https://github.com/robotastic/trunk-recorder):
```
~snip~
[2019-11-02 18:13:03.580708] (info) Driver: osmosdr
[2019-11-02 18:13:03.580738] (info) C…
-
Hello!
I have been attempting to get my RX888 working on Linux using libsddc. Everything built fine, I setup udev rules and downloaded the firmware from Github CI, ran
`./libsddc/sddc_vhf_stream_…
-
Hi When I load the tutorial examples into gnuradio-companion, your samples that start with 3_ are broken, there is something wrong with the osmocom Source block. The `Ch0: GainMode:` is set to 0. When…
-
This is fairly off-topic as it relates entirely to gr-osmosdr code and not libhackrf code, but I haven't seen any active issue tracker or other forum actually used for gr-osmosdr, and I'm hoping that …
-
I am very grateful for your work! Do you plan to support USRP B210?
UR21F updated
6 months ago
-
I'm using Gqrx to test my new USRP N310 SDR, with following versions:
- Gqrx: v2.15.8-13-gf108a29
- Gnuradio: v3.11.0.0git-21-g120268de
- gr-osmosdr: 0.2.0.0
- UHD: UHD_4.1.0.HEAD-0-g6bd0be9c
…
-
Hi all,
I have a HackRF One and am attempting to run the gr-gsm suite to analyse GSM traffic, however none of the tools seem to be working. These are the issues I am having, I assume they are relat…
-
Hi guys. I'm trying to do a GPS receiver with bladeRF x40. To do it, I am employing this configuration file [gnss-sdr_GPS_L1_bladeRF.conf](https://github.com/gnss-sdr/gnss-sdr/blob/master/conf/gnss-sd…
-
### What happened?
The Low Pass Filters generates a `Param` error on the `Window` config regardless of which window type is selected.
```
Param - Window(win):
Value "window.WIN_HAMMING" cannot …