-
I have an OpenTherm Gateway from November 2021 with a wifi module (NodeMCU ??) and I would like to update it with the latest firmware. The process is not completely clear to me and I have some questio…
-
### The problem
OTGW integration cannot connect to OTGW in relay server mode since 2023.6
It used to work until 7th June 2023
### What version of Home Assistant Core has the issue?
2023.6
…
-
### The problem
pyotgw has the function set_max_ch_setpoint, but this does not appear to have been exposed as a service in opentherm_gw integration. Would it possible to expose this? Alternatively, …
-
### The problem
The sensor component detect strings as integers resulting in an error. See diagnostics information below.
I would expect that if the test for integer data type would fallback to d…
-
Hi Ramón,
Following the Homey website the OTGW-app is not compatible / working on a new Homey Pro (Early 2023).
Is it possible to make the app working on it?
Regards, Ronald
-
As soon as I configure either "main" or "auxiliary" climate entities in the "Climate" settings tab the heating stays in "inactive" mode forever.
Room temp: 19°C
Target temp: 25°C
Heating is not s…
-
### Link
https://www.aqara.com/eu/product/radiator-thermostat-e1
### Database entry
{"id":80,"type":"EndDevice","ieeeAddr":"0x54ef441000128356","nwkAddr":12635,"manufId":4447,"manufName":"LUM…
-
I see multiple times the following error:
Pretty clear whats happening as it expects 00 - 64 at that location, but there are a lot of these errors. Could it be that 64 is not the max value?
Att…
-
### The problem
When you call
SERVICE OPENTHERM_GW.SET_CONTROL_SETPOINT with a value other than 0 the boiler start the cental heating as expected.
unfortunatley this last just a couple of minu…
-
I'm running Domoticz 2022.2 stable on a Raspberry Pi 3.
I configured with "Setup->Hardware" a "MQTT Auto Discovery Client Gateway with LAN interface"
The Auto Discovery Prefix is "homeassistant" (S…