-
I am not sure if I have something misconfigured or if this is just expected behavior, but I am getting poor file transfer performance. Speeds are 45-60 MB/s whereas samba is around 275 MB/s with my se…
-
- [x] Add [Wiring instructions](https://github.com/danarrib/BulletGCSS/wiki/Wiring) for the new T-PCIE + SIM7600 Board.
- [x] Update [Setup Modem Wiki page](https://github.com/danarrib/BulletGCSS/wik…
-
I am trying to develop Buildroot-based firmware based on Linux 5.10 instead of stock 4.19 one. Using 5.10-develop branch. SoM is https://www.forlinx.net/product/rk3568-som-125.html
Stock DT is:
``…
-
设备信息:
设备型号:FriendlyElec NanoPi R5S
固件版本:iStoreOS 22.03.6 2024030112
内核版本:5.10.201
宽带信息:
成都电信100M
问题描述:
在iStore拨号的情况下,会出现经常性的重拨,有时候重拨很快,几秒恢复联网,有时会出现重拨完全失败,根本播不上号;每次只要重拨号后…
-
Hi,
I use asahi linux for 2 months now, recently i noticed, that wifi sporadically stops working.
I usually did updates with "sudo pacman -Syu". Is that a problem?
After reboot everything works fin…
-
Switchtec-user is userspace code for the Microsemi PCIe switch.
Now it support In-Band (Linux/Windows), UART, and I2C interfaces.
Specific to I2C interface, it was developed based on x86_64 system, …
-
I activated `boot.initrd.systemd.enable = true` on my machine.
On the next boot, once logged in my Gnome session, I didn't have Wifi anymore.
The offending lines in dmesg:
```
[ 9.892901] usb…
-
I am trying to use LitePCie for my project with the [Trenz TE0712](https://wiki.trenz-electronic.de/display/PD/TE0712+TRM) board. The target and platform files are not there in the [litex_boards](http…
-
```
System Network related textual and graphical classes do not produce any output.
See attached image for more information:
1) Running speed test on http://speedtest.net/de/
2) Computer performance …
-
```
System Network related textual and graphical classes do not produce any output.
See attached image for more information:
1) Running speed test on http://speedtest.net/de/
2) Computer performance …