-
Hello,
Thank You for Your Hard Work,
I would like to know if it is possible to support analog sensors like FSR and Piezo for zprobe, using the extra TH pin.
I know that there are many opti…
Zezoh updated
2 years ago
-
Hello! The rain sensor for my WS90 isn't showing up and I am getting the errors in the logs below. Everything else has been working great. Let me know if there's any other information I can provide th…
-
I was able to use a piezo element to get my beepberry to speak using espeak. It would be nice if the next rev of HW had a buzzer/piezo for indications and audio.
A little tinny, but it's usable.
…
-
The issue applies to sub-messages where the channel ID is passed as part of data packet. In those cases the channels should be addressed as 1, 2, 4, and 8 rather than 1, 2, 3, 4. The only exception to…
-
Bonjour,
nous utilisons l'API de piézométrie pour récupérer les historiques de chroniques en utilisant le nouveau code BSS. L'API "Chroniques" ne fonctionne pas avec le nouveau BSS. Une erreur est …
-
This way the tool can be optimized solely on a computer (and later on perhaps on a phone)
-
Last time, we decided to change our safety check method from checking control speed to checking resonance frequency components.
I added some codes analyzing frequency components of control pulses usi…
-
Lakis on rcgroups provided code changes and wiring diagrams for firmware versions less than 3.0 that enabled one to have external leds on A4 and A5 and a piezo buzzer on 32 when using a ULN2803A. Sin…
-
Juego v2.b had the piezos on D12 and D13
Juego v2.c moved then to D03 and D04 ... when updating the Juego core project, it will no longer initialize
```
Initialize...
Instantiating Jeugo v2 ha…
-
On other platforms, switching PWR from 1 to 0 to 1 again restarts the program regardless of whether the device is connected to the USB port. Con be observed on Rev A5 and Rev A boards up to firmware/…