-
### PROBLEM DESCRIPTION
I connect one Pzem-004t-v3 to ESP32. R8 where lowered.
At boot Web UI show 8 phases and then drops to 3 phases (???). Correct values where only for L1 and each seco…
-
hello I built an energy meter of 3 faces with pzem-0004T v3 and I have the problem that the faces reset the accumulated energy after the 60kw approximately.
is a bug? thanks
https://youtu.be/ekmTV…
-
Hi, I want to use the PZEM-004T to measure the power from and to the grid.
It woud be nice if this could be added to the code.
I created somethins myself with sct-013 and a ZMPT101B.
I can measur…
-
### PROBLEM DESCRIPTION
I have 3 PZEM-004t v3 connected to NodeMcu .
Sometimes the voltage is down to 0 for 1 second ( it can be 1 pzem or 3 of them) and the Energy is jumping to enormous value,…
-
Hello, as we all know there is no power monitoring in Homekit, but said feature (monitoring and auto-off after a set threshold) could be implemented within the “Show setup” function in Eve.
Also I t…
-
I've two air conditioners on my house, but using the sensor Energy Current, my devices reports values too differents. One of this has 12000 BTU, and the integration reports 50w in Energy Current on …
-
Можно ли прибор использовать с импульсным счетчиком электроэнергии?
-
I have a PZEM004 connected to an Arduino Nano, and it works like a charm, thanks for this library.
Nevertheless I have noted that the current flow is always indicated as positive, even if I reverse t…
-
### The problem
Integration sensor doesn't check for NaN values on the input and thus accumulated value can be spoiled forever by a single NaN coming from an input sensor. This is in particular possi…
-
Hello all,
I am using PZEM-004T and Arduino UNO to measure electricity consumption. The module is now working well, I can see the values on Serial screen. However, I still have some questions as be…