-
Running a privileged container with `UDEV=on` and hotplugging a storage device does not result in the device files being created.
Without `UDEV=on`, the device files aren't created at all.
With …
-
Using this repo (https://gitlab.com/natecontrols-public/resin-octalbonescript-poc.git) to reproduce the issue. One can see that GPIO and UART is correctly initiated, and the code runs as follows:
On …
-
This device is based on the eMMC Raspberry Pi 3 compute module.
* **CPU**: Broadcom BCM2837
* **GPU**: -
* **Memory**: 1GB
* **Storage**: 4GB eMMC
* **Features**:
* [Analog and digital I/O …
-
**CPU:** 1GHz Allwinner R8
**GPU:** ARM Mali 400 GPU
**Memory:** 512MB
**Storage:** 4GB NAND flash
**Features:**
- Built in WiFi B/G/N
- Bluetooth 4.0
- Full USB Port
- Composite video port
- Includ…
-
**CPU:** Amlogic ARM® Cortex®-A53(ARMv8) 2Ghz quad core CPUs
**GPU:** Mali™-450 GPU (3 Pixel-processors + 2 Vertex shader processors)
**Memory:** 2Gbyte DDR3 SDRAM
**Features:**
- Gigabit Ethernet
- H…
-
On RaspberryPi 3 2.9.6+rev1, the user have a wireles dongle that uses the rtl8192cu driver. The hardware is reported to work well after a [recent change]((https://github.com/resin-os/resin-raspberrypi…
-
This does not happen often, but we have a user who is more severely affected by it. Rebooting makes the device reconnect again.
For now I implemented the following workaround that we are still veri…
-
been having a bit of an issue, and i'm not sure if this issue belong here in the OS or if its a Docker problem.
### Steps to reproduce issue
- Flash the **resinOS** provided by the resin dashboard…
-
I've been trying to get our Edison based HW that uses a USB-Ethernet dongle for internet connectivity up and running but with no luck.
I'm running
- Edison module with ResinOS 1.19 and Supervisor …
-
The resulting disk image of the build for balenaOS seems to be `.resin-img`, and not a well-established file extension such as `.img`. Because of that, e.g. if the file is compressed in an archive, et…