-
Hello,
spi_master: spi_device_queue_trans(657): rx length > tx length in full duplex mode
Every time I swipe the RFID card with reader i got this error and ESP32 restarting.
Could you help me…
-
Hi,
I have gotten a uhf rfid serial based on your documentation i have gotten a same one in the following link,
https://www.aliexpress.com/item/UHF-RFID-card-reader-6m-long-distance-range-with-8db…
VanQz updated
6 years ago
-
(likely PUB/SUB) module which sends an "access event" to the system controller module. containing, at a minimum:
* user id information (such as RFID card id)
* access information (i.e., which de…
-
```
Hi everybody, i'm trying to write my card but i can't i have the same error.
This fail only occur with an specific tag with some other tags had been wrote
succesfully .
Im'm using libnfc 1.7 in d…
-
Allow people to open the space with only a PIN, no RFID card necessary.
Codes should be valid for only a limited amount of time, say 24h, e.g. if someone forgot their token.
What do you think?
-
untuk optimalisasi penggunaan absensi,,, Pegawai yang datang melakukan absensi dengan cara menempelkan KTP pada card reader
-
Since testing is slow, a patient (or other visitor) can some and leave hospital before we know he is sick. then we need to track all the personnel and other hospital visitors that patient was in conta…
-
## Overview
- We encourage you to share your thoughts regarding how to utilize Home Assistant and our products to come up with interesting ideas.
- You can just leave it by the comments below.
- Whe…
-
Hi!
Do anyone know why i could have problems with esp-rfid-tools not logging properly?
Sometimes it manages to read a card but after I have checked the log and then tries to read a new card it …
-
could you add frid support thru gpio pins so you would scan a rfid card and then it would switch to a difrent spool or have a simple com system so pin 1 would be spool 1 pin 2 would be pin 2 or uart o…
ghost updated
5 years ago