-
I use this repository for my sensors BME280 with Attiny85. The first one works well but all others keep the same ID even if I change the ID value in the configuration.h file.
I always get an ID=5A20
…
-
Hi,
Probably a stupid question but for the life of me I can't figure out how to use the mqtt output. I've never used mqtt before and can't seem to find a sample setup that I can understand.
I'm…
-
Hello,
tryed your code, but the covers only respond to the prog command.
but the rest isn't working, what could be wrong ?
```esphome:
name: somfy
platform: ESP32
board: nodemcu-32s
…
-
### Hardware
ESP32
### Firmware version
V2.4.7
### Application version
V2.4.7
### What happened? What did you expect to happen?
I created my different rooms ( 10 ).
I paired my 15 motors ev…
-
Hi I'm trying to decode a remote control but no matter how I press it I don't get any messages. Please help. I have tested the receiver from the transmitter(SendDemo) and it is working
The sample I…
-
### The problem
Hello,
I'm trying the new Dooya RF and i'm unable to read codes from my remote DC1600 @jesserockz
https://github.com/esphome/esphome/pull/6488
What remote has been tested …
-
### The problem
I checked the logs, after installing HA core 2024.11.0 and found the message shown below.
### What version of Home Assistant Core has the issue?
core-2024.11.0
### What was the las…
-
Is there any plan to insert more codes the CUL can decode?
Like in FHEM many sensors (temperature, humidity etc.) can be read by the CULs. It would really be great if we can add those codes here as w…
-
Hello,
My Logitech QuickCam E2500 webcam which worked with Buster 32 bit on Raspberry PI3 is not detected by Motioneye on Bullseye.
Do you know where the problem could come from? thanks for your adv…
-
Im a developer, but honestly its so hard to understand HS plugin logic its making me insane. Got so many good projects in the pipeline it should be extremely easy to setup a dev environment and "just …