-
平台：RK3288
重新编译了protobuf3.4以及libmace.a，GPU版本，编译test程序出错，如下：
firefly@firefly:~/github/mace-makefile-project/unit_test_gpu$ make
g++ -o demo unit_test.o ../library/mace_gpu/libmace.a ../library/prot…
-
Hi, I got it working on:
TinkerBoard Rockchip RK3288 Mali-T764 GPU
https://github.com/madhavajay/mace-makefile-project
-
华为平板 下载正常，但是要用第三方wps打开
rk3288和虚拟机上不下载
-
I am having issues running Poly Bridge.
I don't know what to do to help with fixing this issue.
Here is log output: https://bpa.st/L6XQ
I am running box86 on Asus C100PA, a RK3288-based laptop, w…
-
Hello,
I'm booting RK3288 Tinker Board with Raspberry Camera Module V2 attached (IMX219). Here is the output of dmesg | grep i2c
[ 0.751264] i2c /dev entries driver
[ 0.759772] of_get_nam…
-
https://czak.pl/2020/05/10/bare-tinker-jtag.html
reading this, fun stuff. Is my understanding that you write blinky in a rksd format for rk32
to an sdcard, load it over the breakout board, and then …
-
Hello,
With the help of **summers**, a member of ArchLinuxARM forum, we try to enable the watchdog device. But it seems that the device is not well described in the device-tree and the official docum…
-
It has 8GB MMC. Android boots OK.
However I can't get u-boot to work with Linux.
I am using mini-loader rk3288_ubootloader_v1.01.06.bin
Then packed the u-boot with
loaderimage --pack --uboot u…
weiqj updated
6 years ago
-
## Question
把tengine git到firfly rk3288板子上，依赖库已经安装，但tengine make报错。可能是板子是arm64，系统是ubuntu 32位的，系统位数不匹配吗？
-
I'm trying to make a low power upscaler using the capabilities of the Mali-T760 gpu on a rockchip RK3288 arm processor
The issue is that the utility runs ok using the NEON processor, but with opencl …