-
Just getting started here and attempting to run the demo D0 via the README instructions on a fresh pi4 install with a 64 x 32 matrix and an adafruit bonnet. Ive also tried setting different values (1-…
-
Im using arduino dragino shield v1.4. { no dio pins used}.
Its showing unrecognized trans-receiver. Where as the LoRa GPS hat is working fine on the RPi.
I'm using arduino uno with dragino Shield v…
-
I've connected the PiTalk 4G HAT to a Raspberry Pi 5 but haven't managed to get it working as yet (Some things appear to be different on the Pi 5)
### Setup
Raspberry Pi 5 8 GB
python3 (3.11.2)…
-
I have obtained a [LED-Warrior14(-01) Module](https://shop.codemercs.com/en/led-warrior14-01-module.html) which is a (nice and cheap) I2C-DALI interface and successfully connected and operated it from…
-
trying the approaches listed here in issue 208:
https://github.com/pimoroni/hyperpixel4/issues/208
and
https://github.com/pimoroni/hyperpixel4/issues/177#issuecomment-1837186505
i still did not …
-
i have Waveshare 13.3 inch ePaper with RPI Hat
i try [Test example ](https://www.waveshare.com/wiki/13.3inch_e-Paper_HAT) and it work
But i cant get working ePiframe
in config i set:
`display=epd…
-
Da ich mittlerweile verschiedene Set-Ups ausprobiert habe und mitunter doch viel rumexperimentieren musste, dachte ich mir, ich gebe hier mal meine funktionierenden Set-Ups durch inkl. der notwendigen…
-
Hi,
Thank you so much for the script. Executing `./lora_gateway_pi2` worked very well using Raspberry Pi 3B+ and LoRa GPS Hat as gateway. However, the gateway I used was single channel gateway. Now…
-
Please include system details:
Hardware:
- 2x Battery with 18x 280Ah connected in parallel to Multiplus II
- Venus on RPi 3B+
- 2x JK BMS connected to the Pi via dbus-serialbattery driver
Se…
wetty updated
18 hours ago
-
Following Adafruit's tutorial here: https://learn.adafruit.com/raspberry-pi-led-matrix-display/software?view=all#software
Genuine Raspberry Pi 3, Adafruit matrix HAT. Panels are the 64x32 5mm pit…