-
### 详细叙述
ifconfig看了网卡信息,无意发现RX中的dropped值很大,而且一直在增加,不清楚是什么情况造成的,我刷了lede的最新的内核6.6也是一样,防火墙默认配置,插件编译也是lede默认选项,没动过。附接口图。我之前刷过爱快,爱快这个问题不存在,所以可以排除硬件问题。目前是用它当主路由没有旁路由
ipv6我是关闭的,eth3没插网线,用不上 所以没信息。
br-la…
-
Hello, I use Arduino to try to send data to fanatec wheelbase rj12 rx interface, but the data received by Arduino is different from what you provided.
I connected the control board to fanatec wheelba…
-
Hi and thank you for you useful library. I've recently installed your library and I want to use it with a SI4703 board connected to an ESP32. But when I use rx.setFrequency(), the program freezes. Aft…
-
All of my sensors are setup in home assistant as MQTT sensors all listening to the same topic, so it would be more useful to receive MQTT on a subtopic like wican/xxxxxxxxxxxx/can/rx/PID. Is it possi…
-
**Problem description**
Do we have already a naming convention for maintenance branches to enable patch release after the M4 release of a working group and/or API repository? The Guideline is cur…
-
# 🐛 Bug
Fails to build on a 6950xt with rocm 6.0 on ubuntu 22.04.
Hi, I know only MI series GPU are supported at the moment, I just wanted to report the errors in case they could be useful. Simil…
-
Given the main branch of XMRIG has finally added YADA support, it would be nice to add the Dominant Pools.
http://yadapool.org:8001/
"algo": "rx/yada",
"url": "yadapool.org:3333",
"user": "Your …
-
Hello,
I am trying to setup diameter interaction between PCRF and PCSCF, but it failed, could check more detail in the attached .pcap.
I also checked the previous discussion, it seems at that mome…
-
Note that it is an Orange Livebox, maybe it is because the frequency differs?
On my Linux Mint 22 Cinnamon Framework 13:
```bash
iwconfig
```
```bash
iwconfig wlp166s0
```
```
wlp166s0 …
-
`E0528 22:45:11.952218 2630039 pinger.go:94] failed to get RX timestamp: no timestamp found
E0528 22:45:11.952133 2630039 pinger.go:94] failed to get RX timestamp: no timestamp found
E0528 22:45:11.…