-
GPy was running a boot.py which (among other things) set LED blue, set WLAN to STAtion and connected, then ran main.py to get ntp server time(among other things).
After updating to 1.20.2.rc6 boot …
-
I am working with G01 and GPy LTE modem. I am trying to attach to the network however the procedure does not complete with lte.isattached == true. I am using Sequans firmware NB1-41019.dup and Pycom M…
-
Hello,
I use a lopy module with current version : (sysname='LoPy', nodename='LoPy', release='1.15.0.b1', version='v1.8.6-849-baa8c33 on 2018-01-29', machine='LoPy with ESP32', lorawan='1.0.0')
I'm t…
crc16 updated
4 years ago
-
https://gcc.gnu.org/onlinedocs/gcc/Binary-constants.html
This would allow a simpler solution to binary number constants and the file binary.h https://github.com/arduino/Arduino/blob/master/hardware/a…
-
Use of LoPy4, firmware 1.20.2.rc10 (jan 2021)
Issue with sending LoRa datagram to TTN V3 Stack after restore LoRa nvsram.
Migrating LoPy4 from V2 to V3 The Things Network Stack went ok after power…
teusH updated
2 years ago
-
Hello everyone,
I'm using a Lopy4 board.
Firmware:
(sysname='LoPy4', nodename='LoPy4', release='1.18.2.r7', version='v1.8.6-849-df9f237 on 2019-05-14', machine='LoPy4 with ESP32', lorawan='1.0.2'…
-
Hi.
I am using a LoPy4 board and try to set up LORA using the 433 MHz band. Nowhere do I find documentation on using the 433 MHz frequency ranges?
I instantiate the LoRa radio with:
lora = Lo…
-
GPY Modem-ESP32 Communication Issue
==========
This document describes this hardware/firmware issue that dramatically impacts reliability and potential applications.
## Issue Description
The fun…
-
This error occurred on a Pycom Wipy
code I used:
```python
import time
from scd30 import SCD30
from machine import I2C
#I2C setup
print("setup i2c")
i2c = I2C(0, I2C.MASTER, baudrate=50000…
-
The board runs for anywhere from a few minutes to a few hours before the issue occurs.
If the watchdog was effective I could live with the crash, but for whatever reason the WDOG does not fire, so th…