-
Currently, PlatformIO only seems to support `cmsis-dap and raspberry-swd` debug options. `jlink` and `stlink` do not appear to be supported.
`SEGGER` have updated their J-Link probe firmware to sup…
-
Hello, i'm having An issue when i upload Marlin 2 to my Skr2.0 revB with 2209 stepper drivers. Printer is a tronxy x5s corexy model. I can move all Axis, however X and Y only move diagonally. Corexy …
-
Characteristics
I have used this display.
![pantalla](https://user-images.githubusercontent.com/80415779/110669045-3bb59700-81cc-11eb-8f2f-6f6d997e2cb6.png)
Compatible with **ili9481**, ili9468, i…
-
I'm quite new to this. What I want to do would be impossible without your work, so thank you.
Looking at the header file ST7735_kbv.h there is a readGRAM function:
`int16_t readGRAM(int16_t x, …
-
with the new version of jyers the nozzle temps extremely fluctuating between 190 -210 by an setted tem of 200.
i have done a pid tunnig , its done ok but after saving the fluctuating nozzle temp also…
-
Describe the issue
I cant use my Touch.
Code to reproduce the issue
I use the arduino esp port. And load the Library TFT_eSPI
the kallibration of the touch is working after that i init the lvgl …
-
I'm trying to display a message on the screen but it remains white, however I can run every example sketch without problems. I even tried to simply make the screen gray in setup but it flickers a bit …
-
**Hi Bodmer.
I tried to test the ESP32_SDcard_jpeg example bit wont work for me
Example is untouched
SD CS pin is connected to GPIO 5
MISO, MOSI ans SCK Pins are shared to TFT and TOUCH pins
…
rs3hc updated
3 years ago
-
Could support for the [Numworks rpi Hack](https://zardam.github.io/post/raspberrypi-numworks/) be added?
With [zardams spifb kernel module](https://github.com/zardam/spifb) the framerate suffers a…
-
After five hours study, I still can not slove the problem.
I use the screen without rst, ST7789 1.14 and 135* 240
Here is my setup:
```
#define STM32
#define ST7789_DRIVER // Configure all…