-
Hi, I'm using dshot300 with Bidir on. But I got 100% error in betaflight and RPM 0 all the time. I've tested it on a stm32f3 and it is working. hence the ESC is working correctly. is this normal?
-
Initialized and updated submodules, have relatively current arm toolchain in path. OSX.
$ make
make: **\* No rule to make target `blh.elf', needed by`elf'. Stop.
$ make -v
GNU Make 3.81
Copyright …
-
hi, when I run make, lots of error:
> arm-none-eabi-gcc -x assembler-with-cpp -mcpu=cortex-m4 -Os -mfloat-abi=hard -mfpu=fpv4-sp-d16 -fsingle-precision-constant -fno-common -g -gdwarf-2 -mthumb -W…
-
So I've tried to put my mailing list reply together but failed to do so in a timely manner so I'll try to continue here as suggested.
Since I've discovered Ivory, Tower and SMACCMPilot few months a…
sorki updated
5 years ago
-
I have this little PCB that can hold several different STM32 CPUs. Among others (i.e. I currently have) 030, 103, 205, 303 and 405. Bravo to ST for making all these have the same footprint (even thoug…
-
Hello,
I am using the cortex-debug and peripheral-viewer to debug a STM32F3 Discovery board. I can confirm that cortex-debug is working, however it seems there is a problem reading the registers …
-
I tried to use the new PWM functionality (by @IamfromSpace I think) and so far failed.
Using a stm32f303, I have the following code:
```stm32f3xx_hal::pwm::tim3(device.TIM3, 16000, Hertz(500), &cl…
-
This is an overall tracking issue for support Tock in QEMU. Then we can use QEMU to test Tock in the CI.
- [x] Convert the current QEMU testing set-up to use a test-runner (or something else more c…
-
Partly discussed in issue1, reported here for clarity.
Using the code from this repo:
https://github.com/jherico/OculusSDK
The amount of turn (gyro) seems to be able half of that expected. I tried w…
-
Rust can support targeting and debugging on STM32 ARM microcontrollers via [OpenOCD](http://openocd.org/).
- See this guide: https://rust-embedded.github.io/discovery/
[CLion can support targeti…