-
Hello,
I am using an STM32L073RZ board and The Avnet Silica NB-IoT Sensor Shield(BG96 Queltec) with Arduino IDE and I want to connect the OV5642 camera module to it. I downloaded necessary librarie…
-
Hello,
I am using your boards (grasshopper and cricket) to develop an animal tracker by using the LoRa radio not LoRaWAN. To reduce the power consumption from the tracker I will like to use a low ene…
-
Hi there,
great work. Since this is based on the Semtech Lora-Net implementation, is Class B or at least Class C supported? As far as i have seen in the commit comments, i think not - or am i mistak…
-
1) Please refer to the following apps for specs on the signal timing for bit-write and bit-read of 1-wire devices. The values you propose do not meet the minimum requirements
https://www.maximintegra…
-
刚用github,如果这个内容不属于issue的话我把他关掉(如果可以的话)
其实B站的视频我看下来感觉稚晖君在说他的设计思路,我想要搞懂几个主要原件的作用
元器件的焊接好像可以在打板子的时候一起焊?自己焊的话对技术要求高吗?我自己以前用过电烙铁也焊过一点点东西,但是技术自认为挺差的
我看到板子中间挖了两个孔,相当于这个设计并没有把卡里面的数据复制下来,而是需要自己把卡里面的芯片取出之后焊上…
-
Are there any plans for implementing the `enableWakeupFrom(TwoWire ...)` function? This would be very useful to have!
-
Are you receiving `Starting LoRa failed` while using the demo code?
PLEASE see the [FAQ #1](https://github.com/sandeepmistry/arduino-LoRa#faq) about using [setPins](https://github.com/sandeepmistry…
-
Sleep power consumption of Catena 4801 is 54 uA and for Catena 4612 is 34 uA with the latest version of BSP and library. The power consumption has to be reduced further.
-
As Wayne reported [here](https://lists.launchpad.net/kicad-lib-committers/msg00547.html), there are some invalid footprint associations in Amplifier_Audio.lib which need to be fixed. They're old refe…
-
**Is your feature request related to a problem? Please describe.**
When setting the read protection level 1 (rdp = 1) on stm32 chips, it makes flashing them with probe-rs / probe-run fail.
Segger…