-
There are some examples of using SPI interface. Settings can be set up in mods.config and header, but in real life, each device has its required settings of SPI, for example, SPI clock polarity (high …
-
Hi,
i´m trying to get your script running on a feather m0, but it seems that the wire.h had changed,
"'class TwoWire' has no member named 'transfer'"
i did´t found any usefull information ab…
-
### Answers checklist.
- [x] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/) and the issue is not addressed there.
- [x] I have used th…
-
As Wayne reported [here](https://lists.launchpad.net/kicad-lib-committers/msg00547.html), there are some invalid footprint associations in Amplifier_Audio.lib which need to be fixed. They're old refe…
-
i have a suggestion to reduce power consumption on the dragonfly,
namely: use a chip select signal to the qspi flash.
as it consumes more power when the chip select is high (which is always the case …
-
Dear Kris
Please, reading your information, about clock speed .... ok for this in consumption..
Ok...
But i miss something where Teensy 3.1 might be twice the STM32F401 : 24MHZ is not 16MHZ .…
-
我司目前想开发基于STM32的阿里云产品,,发现了ST公司与阿里云有相关的合作新闻:
ST与阿里巴巴集团旗下的云计算科技公司——阿里云合作,推出基于STM32L4 IoT探索套件快速开发AliOS Things的方案。
这个是AliOS-Things-master平台的合作的代码路径:
AliOS-Things-master\projects\Keil\B-L475E-IOT01
…
-
Hi Kris,
First, Thank you for your forums and support.
We are building a new product using the LSM9DS1 IMU unit.
We try to use it on a slow flight drone and currently we are at a preliminary stag…
-
Dear Thomas, Kris,
I have a Dragonfly, a Butterfly and a Ladybug boards.
I have uploaded a sketch to a Dragonfly, while the board manager was set to Butterfly and then uploaded a sketch to Butterf…
-
I tried the esp32_5637 code on Arduino Nano. I am unable to get rid of drift. Is esp32 fast enough for sensor fusion at high frequencies? I need to synchronise the angle measurement with a 30fps camer…