-
Hey Strange error.
This worked before but its been a few weeks and updated Radio lib atleast twice since then, the simple receive and transmitt example schetches return -2 or -706 error codes.
…
-
Hi, I like to use Class C support. In Class A the application works well but at the moment when I switch to Class C , the guru kicks in with the following stack. Any suggestion or any working sample c…
-
I've got syncword showing as SyncWord = 2414, but where is this set and what is easiest way to change it please?
Thank you.
`flatus@flatus:~$ grep -r "2414" /home/flatus/Arduino/libraries/SX126x-…
-
The sx1261 seems to be timing sensitive during configuration. I have multiple strange behaviors like low power output or bad frequency.
I'm using a custom bord with stm32l152 and I measure output…
-
Hi,
We are using SX1272 (Region EU868 ClassA) and been successful in getting join/uplink/downlink and it's working with two different gateways (kerlink and objenious)
i actually faced a problem…
-
### Category
Other
### Hardware
T-Echo
### Firmware Version
1.2.59
### Description
Hi
I did not find **"Long Range FHSS settings"** in **[Protobuf API](https://meshtastic.org/docs/developers/p…
-
I was able to compile fine, but when I run:
sudo PORT=/dev/ttyUSB0 make flash
It looks like it's trying to flash the Evil Crow. Lights on it are blinking. Then, I get this: Any ideas what I'm do…
-
Hi,
Thanks for this great library!
### Introduction:
I'm currently in a somewhat strange situation. I'm trying to decode the SPI communication from a `SX1261`.
The complete story is that I hav…
-
Hi,
I would like to use your software to integrate a Bresser 9602510 (5in1) sensor via MQTT into my system.
I can't get it to work. I already stopped after "Starting execution..."
I followed your…
-
Hello Jan!
sorry for dumb question, but I carefully read all corresponded issues regarding CubeCell. FSK modem works great at SX1276+ESP32
But my problem is CubeCell at FSK mode. Can not pass ini…