-
### Please confirm the following
- [X] I agree to follow this project's [code of conduct](https://docs.ansible.com/ansible/latest/community/code_of_conduct.html).
- [X] I have checked the [current…
-
### The request
Utworzyłem integrację, ale nie pojawił mi się żaden termostat. Chciałbym za jego pomocą zmieniać zadana temperaturę zaworu mieszającego.
Sterownik ST-801 zPID, rozszerzenie o modul I…
-
When using a TTX Tech controller with x360ce, moving the right stick along the x-axis causes the cursor to move along the y axis, and moving the stick along the y axis causes the cursor to move along …
-
안녕하세요. 은영님! 김동일 튜터입니다.
이번에 처음 스프링을 배우고 과제까지 제출하신다고 고생많으셨습니다!
피드백은 저번처럼 [잘한 점], [개선되면 좋을 부분], [고민했거나, 어려웠던 부분] 으로 나눠서 피드백 드리겠습니다.
-
Wie wäre ein Ribbon Controller an der Stelle?
Sowas in der Art...
http://www.exp-tech.de/linear-softpot-ribbon-sensor-100mm?gclid=Cj0KEQiA8orFBRCEpODivaOft_EBEiQAy3mlfbUO-XBlmnfA44C4mmNfZ53ATwTs8L92…
-
Based on:
https://github.com/marmolak/gray386linux/issues/3#issuecomment-2077724725
It seems like the keyboard doesn't work.
According datasheets of M6117, there is keyboard controller in SoC w…
-
### Validation
- [X] I've read the [FAQ](https://github.com/xenia-canary/xenia-canary/wiki/FAQ).
- [X] The Xenia build used is from a canary branch. (not MLBS/AlexVS/master/pull requests, etc)
- …
-
Observed this nice effect with the XIM 3D controller which can be overlayed in videos using OBS:
https://community.xim.tech/index.php?topic=99755.0
-
After installing and configuring the data in the ruby job file I get the following error after starting dashing:
```
bundler: failed to load command: thin (/usr/local/bin/thin)
TypeError: nil is not …
-
I'm moving out of my house soon and have many coloured leds which each use their own controller. The kitchen, for example, has 7 controllers.
Normally the above was managed by openhab via mqtt but …